Hello peeps, what frosts (Rosco or Lee) are you using in this fixture or do you use the ETC OEM Frost options? Best
I've got 21 of the ColourSource 4 units (the "ellipsoidal") version.
I use the the SFD (?) in the gobo slot (which doesn't frost the light at all, but keeps the LED pattern from showing onstage.
I use the SWD (?) ETC frost in the gel slot for some front wash units, but not the high tips where I usually use deeper colours and gobos. It's quite a heavy frost (frostier than R114), and takes the intensity down a good notch or two (technical terms).
I haven't tried R132, R119, or R114 in them
Look to the data sheet, there are many optics you can use, depending what size and form you need. I preferred Oblong or Round Field with medium or wide option.https://www.etcconnect.com/Products/Lighting-Fixtures/ColorSource-PAR/Documentation.aspx
Thanks for this... I am trying to use is Lee or Rosco frost as compared to buying the ETC options... Thoughts? Cheers!
Frosts like R132/114/119 will work on profile spots, but not with fixtures like color source par. What you want to achieve?