• State Not Answered
  • Date
    Patrick Matheson
  • Date
  • Replies 4 replies
  • Subscribers 34 subscribers
  • Views 2549 views
  • Users 0 members are here

Colorsource Par and Frost?!

Hello peeps, what frosts (Rosco or Lee) are you using in this fixture or do you use the ETC OEM Frost options? Best

Parents
  • 0

    Hi Patrick

    I've got 21 of the ColourSource 4 units (the "ellipsoidal") version.

    I use the the SFD (?) in the gobo slot (which doesn't frost the light at all, but keeps the LED pattern from showing onstage.

    I use the SWD (?) ETC frost in the gel slot for some front wash units, but not the high tips where I usually use deeper colours and gobos.  It's quite a heavy frost (frostier than R114), and takes the intensity down a good notch or two (technical terms).

    I haven't tried R132, R119, or R114 in them

    Andrew Riter

Reply
  • 0

    Hi Patrick

    I've got 21 of the ColourSource 4 units (the "ellipsoidal") version.

    I use the the SFD (?) in the gobo slot (which doesn't frost the light at all, but keeps the LED pattern from showing onstage.

    I use the SWD (?) ETC frost in the gel slot for some front wash units, but not the high tips where I usually use deeper colours and gobos.  It's quite a heavy frost (frostier than R114), and takes the intensity down a good notch or two (technical terms).

    I haven't tried R132, R119, or R114 in them

    Andrew Riter

Children
No Data
Related

www.etcconnect.com