Blinking led house lights

Not necessarily.
We might be able to figure this out, but I need to ask a bunch of questions
-Can you describe the specific blinking you are seeing? Is it all the time, only at specific values, only when their levels are moving through a specific range?
- What are they currently connected to (Sensor ( what type), Unison ( what type)?
- How many per circuit?
- Do they all blink or just some of them?
- Can you provide any more information on the bulbs? Such as:
- Brand
- Are they dimmable?
- If dimmable, are they designed to dim via forward or reverse phase dimming?

This will help us on the way to figuring it out.

We have a sensor sr48 rack, 3phase 4 wire 50/60hz 100,000a 240vac
With a unison CME Control
3-6 bulbs per circuit
Blinking occurs as bulbs go bad, about one bulb per month over 16 circuits
Bulbs blink when on at any range
Ecosmart bulbs, rated for 120vac 60hz, dimmable

These are LED? Typically these bulbs should last 20-30 years according to the manufacturer, and you are having lamps fail? How long does a lamp last in a fixture?

These are LED? Typically these bulbs should last 20-30 years according to the manufacturer, and you are having lamps fail? How long does a lamp last in a fixture?

Fail rate is between 2 and 8 month, I'm not sure if the bulbs are phase forward or reverse. Could the issue be the 120vac bulbs and the system being 240 vac?