Element 60 update

Hi Ratko,

 

yes you can download the EosFamily v2.5.0 Update file and unpack to a USB Stick and insert the USB Stick in the Element in the Shell->Setup,

then update directly from v1.9.12 to Eos Family Software v2.5.0.

 

After the Update, the current Show will be cleared from temporary Memory, so please make sure

the Show is saved to the console. You can then reopen this saved Show from the console Memory after the update.

No Passwords are needed to update or open the file.

Please download the EosFamily v2.5.0 RELEASE NOTES from our Website. It will explain any of the necessary Firmware updates.

You will also Need to order the free keycap upgrade Kit for Software 2.x because 3 Buttons have changed their functions. You can order this from your local dealer for free, or directly from ETC London.  

Thank you. Can you tell me wich buttons are change and what is now there function or do i have that in some video instruction? Some time this year later i should get another console element 40 i have now e 60 do you know is that buttons changed in the new model or do i need to specifay that to the deeler? Thank's again you help me a lot.

Element_KeycapKit_v2.1.0_SetupGuide_RevA.pdf

Here is the Explanation of the keycap change in the attached pdf.

Please also download the new ELEMENT MANUAL v2. and then the Eos Family Manual Supplement v2.5 and look thru changes - there have been quite a few changes since v1.9.12.

If you buy a new Element, it will have all the newest keycaps on it.

Thank you guys werry much. :)

Thank you guys werry much. :)