Mistake in Library - Cameo TS 200 FC

Hi,

I've ordered 4 fixtures like this : https://www.cameolight.com/fr/solutions/dj-musiciens/eclairage-statique/projecteurs-de-theatre/20479/ts-200-fc

These are Cameo TS 200 FC

In the latest library of my ColorSource (16.0.5) the two last dmx modes are 11 & 13 channels, but on the dmx table from the manufacturer it says 12 & 14 channels ( https://www.cameolight.com/fr/downloads/file/id/966404022 )

The mistakes are the same in both situation:

- channel 2 (dimmer fine) is missing, but there is a gap in the patch, so it's not a problem for next channels (but is it a normal behaviour ?).

- last channel is missing in the library. In both case on the manufacturer DMX table, the last channel (12 & 14) is the device setting, and the previous one is the color mode crossfade time (that don't seem useful). So I think there should be a gap here too.

I give tou an example for the 12 channels version:

The manufacturer table:

1 Dimmer / 2 Dimmer Fine / 3 Strobe / 4 hue / 5 hue fine / 6 Saturation / 7 Sat. fine / 8 Color temp / 9 Tint / 10 color mix / 11 Color Mode crossfade / 12 device settings

The console library:

1 Dimmer / 2 Gap (unpatched)  / 3 Strobe / 4 hue / 5 hue fine / 6 Saturation / 7 Sat. fine / 8 Color temp / 9 Tint / 10 color mix / 11 device settings

So, is there a way to edit it by myself, or do I need to wait for an update ?

Thanks in advance !

Parents
  • I have tried to edit the fixture library, but I only can add the dimmer fine channel. If I move (on the 13 channels version) channel 13 to channel 14, everything seems to be fine in the patch, but I loose every parameters of this channel.Those parameters don't appear  in the CS Personality Editor neither.
    I've I tried to edit the file in the notepad, but I may have broke something : nor the console or the the editor can see the fixture.

  • At the time of writing ColorSource does not support 16 bit Intensity parameters, so the "Dimmer Fine" DMX slot is not used.

    At the time of this post, library 16.0.5 was more than six months out of date. The latest at the moment is 16.2.1.

    ColorSource Library updates may be found here: https://www.etcconnect.com/Products/Consoles/ColorSource/Software.aspx

    However it does appear that Cameo have deleted the 11ch HSI Fine and 13ch Direct modes and added two new modes with 12 and 14 slot footprints. Sadly they did not let us or Carallon know about the change.

    We will update the personalities to the "REV: 02" manual in the next few weeks, check for a newer version at the above link in a couple of weeks time.

Reply
  • At the time of writing ColorSource does not support 16 bit Intensity parameters, so the "Dimmer Fine" DMX slot is not used.

    At the time of this post, library 16.0.5 was more than six months out of date. The latest at the moment is 16.2.1.

    ColorSource Library updates may be found here: https://www.etcconnect.com/Products/Consoles/ColorSource/Software.aspx

    However it does appear that Cameo have deleted the 11ch HSI Fine and 13ch Direct modes and added two new modes with 12 and 14 slot footprints. Sadly they did not let us or Carallon know about the change.

    We will update the personalities to the "REV: 02" manual in the next few weeks, check for a newer version at the above link in a couple of weeks time.

Children
Related