Mistake in Library - Cameo TS 200 FC

I have tried to edit the fixture library, but I only can add the dimmer fine channel. If I move (on the 13 channels version) channel 13 to channel 14, everything seems to be fine in the patch, but I loose every parameters of this channel.Those parameters don't appear  in the CS Personality Editor neither.
I've I tried to edit the file in the notepad, but I may have broke something : nor the console or the the editor can see the fixture.

At the time of writing ColorSource does not support 16 bit Intensity parameters, so the "Dimmer Fine" DMX slot is not used.

At the time of this post, library 16.0.5 was more than six months out of date. The latest at the moment is 16.2.1.

ColorSource Library updates may be found here: https://www.etcconnect.com/Products/Consoles/ColorSource/Software.aspx

However it does appear that Cameo have deleted the 11ch HSI Fine and 13ch Direct modes and added two new modes with 12 and 14 slot footprints. Sadly they did not let us or Carallon know about the change.

We will update the personalities to the "REV: 02" manual in the next few weeks, check for a newer version at the above link in a couple of weeks time.

Thank you Richard !

I had not seen the library updates link, I thought those updates was included in the software releases.

So, I understand that this kind of modification is impossible by myself with the personality editor ?...
One more question : is there a way to subscribe to a channel to be aware of a new library release (or software) ?

Thanks again ;o)

The CS personality editor doesn't currently support editing of Lamp Commands, and unfortunately this fixture has several of those so you won't be able to edit the existing personalities. (You can create new ones and put the commands in as normal ranges.)

In normal times there are fixture library updates every one to two weeks - sometimes more often - as the thousand-or-so fixture manufacturers release new fixtures (and update existing ones) all the time. We don't announce these updates as it'd tend to drown everything else out, and most people only want to know when they're buying new fixtures.

(Right now the cadence is slower for sadly obvious reasons.)

Full software releases are (usually) announced on this forum, so you can subscribe to the forum if you'd like an email about it.

Perfect. Thank you !

This fixture is updated in CS fixture library 16.2.2, which will be posted to the ETC website 'shortly'

This fixture is updated in CS fixture library 16.2.2, which will be posted to the ETC website 'shortly'

Great thanks !

Richard, there's still a problem : the 12ch version don't handle lamp commands

I'm seeing them here (3.1.0). Which version of ColorSource software are you using?

The 14ch mode is missing though, I will look into that.

Indeed, it works on the real console :o)

The bug was on the CS offline (both are 3.1.0.23 version)