Timecode Column

You should be able to use the syntax [Cue] 1 [/] {Timecode} 2 [Enter]. This would tell the PSD to show the timecode times of event list 2 for cuelist 1.

Thank you I will give this a go between shows

I have to tried this although it shows up timecode on 1. It doesn’t show up any other time codes in the show in that column 

I have tried changing like you said above it just doesn’t seem to work 

I have 14 lists for timecode all on source 1 and before each number I have a macro to enable the list I want active 

would really like to see the timecode in the columns

any help will be appreciated 

Are any of the event actions associated with the cue list? The events that appear in the PSD timecode column are those with that reference a cue and have a time set.

Thank you for this sk8rs_dad 

So every list has a load of events it will say event 1 time .... action cue 1 for example 

I have attached 2 photos hopefully this will make it more clear

Hopefully you can see from the photos want I'm doing

I think I finally understand what you're trying to do. I'm not sure there's an easy way to get there.

The Time Code feature n the PSD appears to be intended to let you assign a time code to a cue. Event list linking assumes that a cue list is linked to one and only one event list.

I'm not sure there can be a universal solution that just works the way you hope. Multiple cue lists and event lists can be active concurrently. Multiple event lists can action the same cue. Whatever time code gets displayed on the PSD will inevitably be the wrong one for somebody.

A possible hack would be to use the event list linking feature and use a macro executed by the cue to set the relationship. The time code would appear for those cues that are associated with the active event list.

Thanks, i have never used the linking feature before will look into this.

If I understand you correctly you have multiple event lists triggering a single cue list. And even multiple events that can trigger a single cue.  Currently the PSD is designed to only show a one to one relationship and will not show more than one time code even if multiple timecode triggers exsist in a single event list. 

i think you might want to reconsider how you’re triggering your cues as this can become a nightmare to adjust in the future  what is your application, there might be better ways to accomplish what you want