HyperDeck Ethernet Protocol (TCP) - Sending from EOS.

Thanks for the responses.  I saw the AV Bridge you mentioned - and its great - but i was trying not to add another computer to the system. 
I ended up coding a simple ESP32 box that takes OSC in and spits out HyperDeck TCP and then gets feedback back and sends back SACN to console for feedback... It seems to work so far in a sim mode - just need to get the Hyperdeck to test now.

Maybe that the BMD protocol act as a server. Try to do it with OSC TCP Client in setup with port number 9993 (<ip>:9993).
TCP Client was introduced with v3.5.5

Thanks for reply, unfortunately the black magic protocol is not OSC at all, I have built a small esp32 device that seems to work in a sim mode, just need to test with real device.  It takes a OSC value, starts and stops recording, and then returns feedback to the console via 5 sacn channels. 

I admit it was a mix between ai coding and me tweaking some stuff.

Thanks for reply, unfortunately the black magic protocol is not OSC at all, I have built a small esp32 device that seems to work in a sim mode, just need to test with real device.  It takes a OSC value, starts and stops recording, and then returns feedback to the console via 5 sacn channels. 

I admit it was a mix between ai coding and me tweaking some stuff.