Need Fixture profile

Hello, John-Mark:

I fear that due to the holidays this profile may not be done in the time you would like. 

I would love to help you make the profile work for you now if possible.

Can you tell me what isn't working right about the profile?

Also, did you assign each parameter twice, or did you change each to 16bit in the fixture editor?

Thank you,

Sasha Aranow

I think i may have figured out the problem. "LDMX" was set to really weird channels. I  didn't know what those were because they were set automatically when I made them 16bit.

I fixed the LDMX and am now having someone test them at the venue.

For the lamp controls:

I just need to make a fixture global retest for now.

I don't know how to determine the number of steps required though.

the manual says this:

CH 10 at   200-219  for 3 sec = reset

How to I do that and how may steps would that take?

If you select the "steps" softkey you will see that you can tell it the number of seconds.   That wait is 1 step.

If you select the "steps" softkey you will see that you can tell it the number of seconds.   That wait is 1 step.