Loading a Cue with a Magic Sheet

Question

I'm running Element with the latest software/firmware. 
 I am creating a magic sheet to call up commonly use groups, cues, and even subs. 
 I'm having an issue specifically with recalling cues... You see, I'd like to create a button the only LOADS a specific cue, but does not fire it. Then I will then be able to hit GO, either in the MS or on the console, and the cue will fire. 
 However, I cannot seem to figure out the command line syntax for the LOAD button. 
 In summary, I want a button on a MS to do the equivalent of loading a specific cue, but not firing it. 
 Thanks in advance for the help. 
 
 Brent

tdrga · Accepted Answer

Another way to do it that avoids macros would be to insert a button on the magic sheet for each cue, with the Target set to Command. Then in the command area for the button, write out the series of commands that will be executed, i.e.: 
 
"Load Cue 1/11"[Enter] 
 
Of course, you will have to customize the cue number for each button. 
 
No matter which way you do it, if you have a lot of cues then it will take some time to set up. 
 
-Todd