High school here with limited knowledge. We have a new enode2 poe plugged into ion xe outputting to an elation six par.
We've got control of the fixture except there is a random flicker/strobe/blink. It does not have a discernable pattern and when put it at 0 intensity, it goes out and randomly flashes white.
Tried other fixtures. This setup with the address works when we use a different node. Talked with etc and elation tech support. Elation thought it might be a bad node, so they swapped it. Same issue. Apart from the blink, everything else works fine: color, pulse, strobe,)
Rdm is off. Artnet is off. Changed the ip of the node to within 1 of the board. Subnets match.
Anyone else had this issue or can lend advice?
Thank you in advance
