Move while Dark

D's are shown when you program a change in non-intensity parameters (NPs) while the light is off.  you can only get a D if you have two cues with both 0% intensity and  both cues have something blue in the NPs. you could expect an L, because that's when while moving intensity up from 0% or down to 0% you also have a change in NPs. but also this requires two cues with something blue in the NPs. which you don't have.

you're right.

D: you need a tracked 0 (magenta minus) and something blue
L: you need movement from 0 to an intensity or from an intensity to 0 and something blue.

Still in search of that illusive "L" the previous show file was cleared of repetitive clues. The experiment was continued with, this time in cue 13, both a move in intensity and focus. Things worked as expected in Augment3d but that sneaky "L" is not present. It may be the way I'm reading things. I found the 'notes' column interesting because I originally made all cues from cue 1 (for homogeneity) so this is cute and assuming 13 lost the note because of a later change. I had never noticed this 'autofill' before. Cute!

Chan 1 is a LED RGB
Cue 1: Chan 1 @ Full, color=red
Cue 2: Chan 1 @ 0, color= blue

-> L

Chan 1 is a LED RGB
Cue 1: Chan 1 @ Full, color=red
Cue 2: Chan 1 @ 0, color= blue

-> L

Yep. Got it that time. Thank you. My "L" is up!