Block in Display Question

The Spreadsheet doesn't show any blocked (neither auto nor regular) parameter. So it's correct that the PSD doesn't show any block flag.

Oh wow. I thought I understood this a long time back. Even in LIVE my PSD doesn't show anything. Clearly, a block occurred when I put chan 4 in cue 4 to zero, To test, I went back to cue 2 and changed chan 4 from FL to 10%. Rather than  tracking right down the list (like chan 2 which was altered in cue 2) the tracking ceased at cue #4  just like it should. As this a case of an auto block I was expecting a "b: (underlined) in the  B column. I put a manual block on cue 3 and got the upper case "B" in white in the column as expected. What am I missing please?

you're not describing an (auto)block. you're describing a move instruction. those are the blue and green intensities. autoblocks are white and underlined.

Oh lord we are gong in circles. My manual p256 (prior 3.0);

Auto Block

." . . for example in cue 5 you set chan 1 to 50%. It is stored in a move instruction. Then you go back to an earlier cue set chan 1 to 50% and it tracks forward to cue 5. Chan 1 will be autoblocked in cue 5 . . .  Auto blocks are displayed yada yada . . . ."

I followed this. Only change was that I made chan 1 60% rather than 50% better to see it. Checked it out in Blind Spreadsheet. The block is there. But still no b in the PSD.  I used to see these "b"s last time I did this but I was using "Cue Only". Would that be the difference?

Robert452 said:

Only change was that I made chan 1 60% rather than 50% better to see it

You need to make it 50% for it to work.

Robert452 said:

Only change was that I made chan 1 60% rather than 50% better to see it

You need to make it 50% for it to work.

Wow! I changed it to 50% and yep, got the "b' thanks. But this is not intuitive to me. Why does it have to be the same value? If you put 50% in the earlier cue. What's the point of blocking when it meets a cue with the same 50% in it. My concern is that although I used 60% it DID stop tracking in cue 5 I.E. an early change blocked a later one. I'm getting myself confused now so packing things in and will read the manual again on the morning with a clear head.