When i turn on the Element Console 1 channel turns on at full. how do i turn this off so that no lights are on until needed??
When i turn on the Element Console 1 channel turns on at full. how do i turn this off so that no lights are on until needed??
We have a similar problem only we get 3 or 4 Slimpar 64 LED lights that turn on when the element 2 console powers up even though nothing is set to be on in the console. We clear the lights only after we run a cue that controls these lights.
A difference is that no channel tiles are "lit". They are all blank like they would be with nothing selected. There is no startup macro in setup. We are running an Element 2 with EOS 3.0, but it has been doing this for the last year when we got the system (then running EOS 2.9).
when you say they light up, do they light up "nicely" (i.e. do all of them do the same thing, sam brightness, same color) or does each of them do their own thing?
when you say they light up, do they light up "nicely" (i.e. do all of them do the same thing, sam brightness, same color) or does each of them do their own thing?
www.etcconnect.com