Hello!
I've recently discovered a few bugs when using Robe Spot 575 XT on Augment3d.
1. It seems to always have the 3-facet prism engaged, no matter what the parameters of the fixture are set to.
2. If you activate the continuous wheel spin on Color Wheel 1, it will not deactivate until Eos is restarted.
This has only been tested on Augment3d, not sure if this behavior also affects the actual fixtures.
I've tried it on both Mac and Windows (10) and had the same results (Nomad Eos v3.0.2.6)
As an update to this post:
Point number 2 is still an existing bug in the latest Eos v3.1.4, the wheel spin on Color Wheel 1, will not deactivate in augment3d.
Additionally, the zoom range got broken after an update (I don't have the exact update info). Basically the zoom on Augment3d is waaaayyyy bigger than in real life.
Attached are 2 screenshots:
minimum zoom:
max zoom:
These are strictly issues with the Augment3d visualization. Real world control appears to be correct so far.
I've replied privately, but for those following:
I've reproduced both issues and am working with the team for a resolution.
For the Zoom issue, the underlying profile sees the DMX and User values set to the same which Augment3d interprets the User value as degrees. A workaround is to edit the user values:
I've replied privately, but for those following:
I've reproduced both issues and am working with the team for a resolution.
For the Zoom issue, the underlying profile sees the DMX and User values set to the same which Augment3d interprets the User value as degrees. A workaround is to edit the user values:
