• State Not Answered
  • Date
    Andrew Riter
  • Date
  • Replies 3 replies
  • Subscribers 185 subscribers
  • Views 4951 views
  • Users 0 members are here

Ion and I-Cues

Hi

Ion 1.8.0

I've just received my first DMX devices: rosco I-cue and a dmx iris.  Thanks to the ETC phone tech, I modified a Utility personality in 5 minutes for the iris.

For the I-cue, I rigged it perpendicular to the centre line pointing DS, and all works fine: Pan sweeps across stage, Tilt moves up/down stage. (patched as 16bit)

Not knowing the final position of the instrument in the room, I tried to invert Pan and Tilt (as if it was pointing upstage).  the buttons in the Patch Attributes screen wouldn't latch on.  their command would appear in the command line. 

The Swap command worked: pan moved it Up Down, and tilt went across stage (but the scaling of how far it went per click seemed way off).

Do I need to invert Pan/Tilt on the I-Cue rather than the console?

Any general advice with these toy. . . . tools?

If I do point it across the room, and swap pan/tilt, can I correct the scaling?  1 direction sweeps 58deg, 1 direction sweeps 200+ deg.

 

Thanks.

Parents Reply Children
  • 0 in reply to jbenghiat

    FWIW, I am seeing this behavior with Martin Roboscan 918s. When I swap pan and tilt it limits the range of motion.

    I am perplexed that there are range limits at all, max sent to the fixture should be 255, min should be 0 regardless of what is displayed to the user.

    Methinks it's a bug.

  • 0 in reply to sk8rs_dad

    We have this issue with some Martin Roboscan 518s as well.  I'm not sure why the profile dosen't seem to be sending 0 thru 255, but it doesn't.

    I think the issue lies with the profiles rather than with the controller.

    As the I-cues do provide a means doing a pan/tilt swap at the fixture, that would be the solution I would use.  A hardware solution is always better than a software solution for something like this.

    We have 6 I-cues with iris and scrollers in our inventory, and they are the most useful fixtures that we have.

Related

www.etcconnect.com