Macro programming channel intensity just snaps to full

Having altered the macro to add the Sneak command, is it possible to adjust the intensity of the fixtures on the Submaster 2 button that I have attached the macro to somehow, at the set submaster fader level?

TIA.

I'm having trouble understanding what you're asking-

You can set submaster levels from the command line, which means that they can also be included in macros, i.e.:

• Sub 2 @30

or are you asking about editing the contents of the submaster to change the levels of the channels that are in it?

Yes, I would like to set the intensity of the fixtures in the macro at the level that the fader is positioned. Is there any macro command to capture at what % the submaster level is at and set the fixtures intensity level at that value?

Yes, I would like to set the intensity of the fixtures in the macro at the level that the fader is positioned. Is there any macro command to capture at what % the submaster level is at and set the fixtures intensity level at that value?

Not directly. But if you have any channel programed into the Sub, you could Recall From that Channel.

A dummy channel would also do. But you need something that has intensity to use the Recal From Syntax.