Adjust Color Pallettes

Yeah this is a huge flaw in my opinion. You can do some large edits in blind, if you select every cue and do something like 'Query Color Palette 1 Enter Color Palette 1 Enter" it should find every instance of a light that is partially in CP 1, and then apply CP 1 to all color params. But you have to do it per-CP, which makes it slow and annoying compared to a proper clone functionality.

That's a good question! There currently is no built-in function to "fill up" cues. If you have "filled up" the color palettes and all your colors in your cues are strictly palleted, then this would be the quickest thing you can do:

[Blind]
[Cue] [Home] [Thru] [Enter] (selects all cues)
Chan 1 [+] 2 [+] 5 {Red} [CopyTo] {White} [Enter]

To add Red or White to your command line either use the parameter tiles in the CIA or press the respective encoder.

This will take the value that's being displayed for the Red parameter (it shows e.g. CP 3) and copy this to the White parameter. It will not take the % value of the Red parameter, but the reference.

Does this help?

This is a better solution since it will do all CPs at once. 

Thanks a lot for the answer, that helps a lot!

There should be an automated function for this. I have indicated a few times before that this is a missed opportunity from ETC's side to improve the software for touring companies that are having to deal with a different type of F.O.H.-led fixture each night. There have been workarounds for some time (e.g. having a fake franken-fixture with every color parameter imaginable somewhere in the group during plotting), but a real solid solution from ETC would be much appreciated!

This sounds like a feature request. Feel free to add it here!

Thank you.