Adjust Color Pallettes

That's a good question! There currently is no built-in function to "fill up" cues. If you have "filled up" the color palettes and all your colors in your cues are strictly palleted, then this would be the quickest thing you can do:

[Blind]
[Cue] [Home] [Thru] [Enter] (selects all cues)
Chan 1 [+] 2 [+] 5 {Red} [CopyTo] {White} [Enter]

To add Red or White to your command line either use the parameter tiles in the CIA or press the respective encoder.

This will take the value that's being displayed for the Red parameter (it shows e.g. CP 3) and copy this to the White parameter. It will not take the % value of the Red parameter, but the reference.

Does this help?

That's a good question! There currently is no built-in function to "fill up" cues. If you have "filled up" the color palettes and all your colors in your cues are strictly palleted, then this would be the quickest thing you can do:

[Blind]
[Cue] [Home] [Thru] [Enter] (selects all cues)
Chan 1 [+] 2 [+] 5 {Red} [CopyTo] {White} [Enter]

To add Red or White to your command line either use the parameter tiles in the CIA or press the respective encoder.

This will take the value that's being displayed for the Red parameter (it shows e.g. CP 3) and copy this to the White parameter. It will not take the % value of the Red parameter, but the reference.

Does this help?

This is a better solution since it will do all CPs at once. 

Thanks a lot for the answer, that helps a lot!