Adjust Color Pallettes

Question

Hi Everybody, 
 How can i update the color Pallettes in the cues when i have a fixture with more colors than in the oriiginal show. For example the Theater where the show was programmed have LED PAR's with RGB but when we tour the Theater there has such with RGBW, when i adjust the colors in the pallettes, the level of the white in the cues stays on the home level and don't take the one from the color pallettes. Is there a way that it takes the one from the color pallettes without updating all cues? 
 Thanks a lot for your help!

eos moderator · Answer

That's a good question! There currently is no built-in function to "fill up" cues. If you have "filled up" the color palettes and all your colors in your cues are strictly palleted, then this would be the quickest thing you can do: 
 [Blind] [Cue] [Home] [Thru] [Enter] (selects all cues) Chan 1 [+] 2 [+] 5 {Red} [CopyTo] {White} [Enter] 
 To add Red or White to your command line either use the parameter tiles in the CIA or press the respective encoder. 
 This will take the value that's being displayed for the Red parameter (it shows e.g. CP 3) and copy this to the White parameter. It will not take the % value of the Red parameter, but the reference. 
 Does this help?

eos moderator · Answer

This sounds like a feature request. Feel free to add it here ! 
 Thank you.

Adjust Color Pallettes

Top Replies