• State Not Answered
  • Date
    Geoff Crisp
  • Date
  • Replies 3 replies
  • Subscribers 187 subscribers
  • Views 1292 views
  • Users 0 members are here

Multi console (primary + client) version 3.3.0

Hi All
A perplexing problem. Multi console connection.
Version 3.3.0 2 consoles both updated from the same file. Same language settings.
Things I have checked: ip and subnet address correct, checked multi console in shell on only one Nic on both consoles (ion classic win 7) can ping the primary from client. Can see the primary and the show file on the right hand side of the screen and can press the reconnect button which gives nothing. I have read the document about troubleshooting multi console envrionment. Made sure the primary console was on and running before starting the client.
What have I missed?

regards

Geoff

Parents Reply Children
  • 0 in reply to Theatermachine

    I have connected by the control port (NIC 1) with both consoles. There is a wifi connected to that network we use for remote focusing. The other NIC sends sACN to the LX network. I have followed the trouble shooting article provided by ETC but have still come up empty handed. We have now packed away the 2nd console so it will ne a little while till I can get back to this.

    regards

    Geoff

  • 0 in reply to Geoff Crisp

    I've had the same situation, but I forgot to write up the solution. I am also not in the situation to test this anymore, but at the time it occurred to me as a bug, especially since the two consoles saw each other in the software, but would not connect until I did toggle this selection box (which makes no sense).

    My set-up:

    Apex console as Primary

    NIC 1: sACN to rig

    NIC 2: Connection to Client and OSC from CueLab, Stamp and Capture

    Laptop:

    NIC 1: Connection to Main Console as Client with Eos Nomad dongle, Stamp (OSC) and Capture (Net3/sACN)

    NIC 2 (Wifi): Used for Internet connection

Related

www.etcconnect.com