• State Not Answered
  • Date
    Anne
  • Date
  • Replies 3 replies
  • Subscribers 188 subscribers
  • Views 48 views
  • Users 0 members are here

output issues Etc Eos PUCK

Hello an older model of puck is outputting only to conventional dimmers.

It refuses to control moving lights or LED lights.

The same showfile works immediately perfect running Nomad from a Macbook.

Any idea what could be the issue with the PUCK - is it a hardware problem ?

Same gadget from macbook, same simple dmx line, same showfile running nomad, everything works fine.

No reaction from LED or moving heads on Puck.

I can not see a different setting or where to look for the problem.

I attach the log file to this post, last show was 'Zero feet Away' perhaps you can see the problem?

On the puck

Eos 3.3.3.10

fixture library 3.3.0.215 october 2015

thanks! Anne ETC_Logs_Puck_Primary_20260204_142704.zip

Parents Reply Children
  • 0 in reply to Anne

    Hi Anne. 

    can you explain how your setup is cabled. From what i understand, you have a Puck with a Gadget connected via usb. And then One dmx line goes to your dimmers and the other line goes to your LEDs. Is this correct?

    Can you also confirm that your macbook and your puck are on the same software version and have the same fixture library installed in the about tab. 

    Also please confirm, since this is a one universe showfile from what i can tell, that your local DMX output on the gadget is sending Universe 1 on both output ports. You can check this in Setup>Device>Local Output. There should be 2 output ports and both should have Adress "1/1" as the output adress.

    hope this helps. 

Related

www.etcconnect.com