Help! Second DVI Monitor stoped work!

Hi Dan, thanks for your answer,

Actually i've tried do that, i was in the shell and access the external monitor arrangement with the two monitor plugged  into the console, but only the first monitor seems to be enable...the second monitor keeps gray, and i can't change any atribute of him...It's a very unusual situation.

Do you know if exist any other way to change the monitor configuration?

I'm disposed to reset the console from the beggning to fix this problem, but anyway, i don't know how to do that too....

appreciate your help.

Hi Cristiano, 

can you contact ETC Tech Services and they 

can help you with this : 

For technical support in the Americas, please call 608/831-4116, or toll-free in the U.S. at 800/688-4116.
For technical support in Europe, please call (+44) 20 8896 1000.
For technical support in Germany, please call (+49) 8024 4700-0
For technical support in Asia, please call (+852) 2799 1220

Hi Corey,

Yes, i will make a call for technical support in the americas , hope they can tell me what's going on...thanks for the information.

Appreciate your Help.

If you unplug and replug the high-density dual-DVI connector AT ALL, take a close look at the pins on the adaptor.  I have found several bent pins on mine and consequent damage to the female panel-mount jack on the RVI.  I am so worried about that atrocious adaptor I am constructing rack mount boxes for my two RVIs with a panel in the back where I will be duplicating the DVI ports so I don't ever jar that connector.  

So, get out a magnifying glass and inspect some pins!