• Date
    Paule
  • Date
  • Replies 9 replies
  • Subscribers 184 subscribers
  • Views 7276 views
  • Users 0 members are here

Tracking / CueOnly

If you`re ure usually working in Cue Only, as we do `cause in some productions none of the cue`s stays as it was originally programmed. So it woudn`t be usefull if every correcture would be tracked automatically. Of course it`s very usefull being able to track single intensities, colors or positions manual. But I hate to be that carefull using that button.

An operator I`m working with had the problem that he switched to tracking-mode accidently and didn`t notice instantly and that meant a lot of Undo.

So, in my opinion the posibility to switch from cue only to tracking mode has nothing to do there! Keep it in setup as it is if you wan`t to change from tracking to CueOnly.



[edited by: Paule at 12:04 PM (GMT -6) on Sun, Jan 8 2012]
Parents

  • The very best answer I've seen is to do the initial recording in Track and the modifications in Cue Only.

    SB

     

  • in reply to Steve Bailey

    Paule said:
    ...So, in my opinion the posibility to switch from cue only to tracking mode has nothing to do there! Keep it in setup as it is if you wan`t to change from tracking to CueOnly.

     

     

    You do set tracking or cue only in the setup. There is no way that I know of to fully change to tracking mode or cue only mode when just programming the cues. Yes you can specify a single cue or action to be done either tracking or cue only when in the opposite mode, but that does not all of a sudden apply the change for the rest of programming. 



    [edited by: bosox242 at 10:00 PM (GMT -6) on Sun, Jan 8 2012]
  • in reply to bosox242

    There was no question, just a statement.
    You´re slipping from Cue Only to tracking mode very easily by hitting the CueOnly/Track button accidently. Try it you´ll see.

    That´s what this post is about. I think it should be only possible to change that in setup.

     

    OK, reading my post again I see I didn´t made that very clear...

    Excusez moi...



    [edited by: Paule at 5:22 AM (GMT -6) on Mon, Jan 9 2012]
Reply
  • in reply to bosox242

    There was no question, just a statement.
    You´re slipping from Cue Only to tracking mode very easily by hitting the CueOnly/Track button accidently. Try it you´ll see.

    That´s what this post is about. I think it should be only possible to change that in setup.

     

    OK, reading my post again I see I didn´t made that very clear...

    Excusez moi...



    [edited by: Paule at 5:22 AM (GMT -6) on Mon, Jan 9 2012]
Children
Related

www.etcconnect.com