SGM G Spot, G Spot Turbo

Could you detail the issues that you are seeing? What exactly is off and needs to be adjusted?

https://www.dropbox.com/s/43jjr75u0e1ucgw/gspot%20comparison.docx?dl=0

Here is a link to a word doc that has snapshots of the changes I made in the profile to get it to work correctly.  Modified profile followed by library profile.

Some of the main problems are the strobe defaults to closed, and the animation wheel defaults to inserted and spinning.

I'm also trying to get a fixture that will work with Augment3d.  I tried to just duplicate the changes in the new profile and that just seemed to break the augment3d model.

Also here is a link to the show file that has them.

https://www.dropbox.com/s/eown2s617533mj1/HA%20Breath%20of%20Life%202020%20-%20v4%202020-12-18%2023-29-33.esf3d?dl=0

Thank you for the information, request submitted!

Thank you for the information, request submitted!

The team has found the following while comparing the provided profiles and would like to confirm those are the changes you are looking for:

• SGM - G Spot Extended
• SGM - G Spot Standard
• SGM - G Spot Turbo Extended
• SGM - G Spot Turbo Extended Comp
• SGM - G Spot Turbo Standard
• SGM - G Spot Turbo Standard Comp

Requested changes:

1. Reverse zoom from “8 to 43” degrees to “43 to 8”
2. Change default of Beam Fx Index/Speed to 0 (from 66)
3. Change default of Strobe to 10 (from 255)

Shutter Strobe from the manual either default “Open” is correct