• State Verified Answer
  • +1 person also asked this people also asked this
  • Date
    Gabe Valliere
  • Date
  • Replies 15 replies
  • Subscribers 869 subscribers
  • Views 6650 views
  • Users 0 members are here

Mac Showfile : Hamilton goes black.

Heyo! Everytime I load up the Hamilton INTRO & Advanced showfile they both work fine physically. The set loads, the characters load, and the fixtures load in perfectly. I press the spacebar to load the first cue and augment goes completely black. I continue to advance through the cues an it remains black. The only way to get out of the blackness is by going to blind, than back to live but nothing changes besides being able to see everything again. Just curious if this is something that is wrong with my showfile or with the newest build for mac. The cues worked perfectly fine with my other show files, but not the hamilton one. Could be something I'm doing wrong. Hopefully someone can help me! Thank you!!

- Gabe

(Sidenote : I am on the newest build.)

Parents
  • 0

    I am having this issue as well. If I advance using the spacebar, the scene goes dark and I lose the edit/ camera/ labels/ etc. This is happening in non- fade to black cues and if I have some ambient light on, that goes dark as well. The cue list is loaded correctly and the master fader pairs are at full. 

    Closing and reopening the augment3d tab fixes the problem.

    Using the dropdown menu go button works, but as it covers most of the screen I would like to be able to use the spacebar go. 

    Thanks!

  • 0 in reply to Meike

    Ok, I fooled around with it a little bit more. I only have the spacebar problem when the augmented tab is full screen. Using a split screen with augmented on one side and the PSD on the other I can advance with the spacebar

Reply Children
Related

www.etcconnect.com