Chan 289 & 290 & Boom 2 SL

Hi all, I’ve re-read and re-read this thread to try and understand what I need to move but I just can’t get my head round it! For Ch253 even if I move a columnl (24) and a wall (24) out the way I’m still presented with a bit of the set model in the way...... what crazily obvious thing am I missing? Is the actual physical position of the fixture wrong??? 
thanks!! 

Hi all, I’ve re-read and re-read this thread to try and understand what I need to move but I just can’t get my head round it! For Ch253 even if I move a columnl (24) and a wall (24) out the way I’m still presented with a bit of the set model in the way...... what crazily obvious thing am I missing? Is the actual physical position of the fixture wrong??? 
thanks!! 

I'm finding the same thing. 

ujamesck - I didn't change the physical positions of any fixtures.  For Ch 253 I needed to move a wall object slightly downstage (and maybe make it slightly narrower) and I was then able to get pretty close to the shot as in the focus notes.  Here's what my Ch253 looks like - probably not perfect but reasonably close.  The red lines are the edges of the piece of "columnl" that I moved. In my showfile it is the 6th entry in the Group: columns - it is now at Position (3.6981, -18.155, -8.8981) and has Size (1.1712, 3.3398, 9.2756)

Ah thank you! I obviously have notifications turned off for this forum as didn't see your reply! Thank you! I shall try and work with those hints when I next get to the desk I've left it all on! :)