Planned for Future

Make position and orientation in A3D patch work with Recall From and Copy To - Eos Family Feature Requests - Eos Family Consoles - ETC - Community

Position Data not currently copyable

is there a plan to be able to copy position data from one channel to another in A3D patch? right now if you copy aa channel it does not copy any A3D data.

cjLights
Parents
  • Maybe this helps: If you already know that you want to set a mirroring position before setting up coordinates for the first one, you can use command line fan with the Position field in Patch>Augment3d and you can also use the Thru key in the PositionX popups. Chan 1 + 2 Position x1/y1/z1 Thru x2/y2/z2 Enter Chan 3 + 4 {PosX} -1 Thru 1 Enter
Comment
  • Maybe this helps: If you already know that you want to set a mirroring position before setting up coordinates for the first one, you can use command line fan with the Position field in Patch>Augment3d and you can also use the Thru key in the PositionX popups. Chan 1 + 2 Position x1/y1/z1 Thru x2/y2/z2 Enter Chan 3 + 4 {PosX} -1 Thru 1 Enter
Children
No Data

www.etcconnect.com