Feature and improvement suggestions

Feedback from users like you help us shape and improve Eos for all productions. We receive a large number of feature requests and suggestions from many sources, including this forum. Your comments and votes help us understand which features you’re passionate about, but there are many additional factors which inform development prioritization for any given release.

The most helpful information you can provide us when commenting on issues is how a particular suggestion would help you. If you describe your use-case and how the suggested change would benefit your work, it lets us gain a much deeper understanding of the need behind the suggestion. Suggestions often have an impact on what we work on, even if we ultimately choose not to implement a suggestion exactly as it’s described. Our ultimate goal is to understand what you and all users need and to create solutions that meet those needs. Occasionally, that’ll mean implementing a suggestion as described, but it usually means working to understand the need behind the suggestion and how we can meet that need for as many users as possible.

While we endeavor to update and respond to popular suggestions, the volume we receive means there will be occasions when we can’t provide an update or response in a timely manner. For bugs and show-critical issues, please use our standard forums and support structures: https://www.etcconnect.com/Contact/Technical-Support.aspx

  • Auditioning output in Live

    MWeeks728
    • Submitted on
    • 0 Comments
    Bear with me because this is a 2 part request- Many times the CLT or the DP want to audition several channel changes at once. Typically its a request something like- "Ch 1 @ 80, Ch 2 @ 65 and Ch 3@ full... Now A/B that." I haven't found a good way...

  • Option to show stage or gate view of shutters in Patch > Augment3d > Shutters

    turingtest2
    • Planned for Future on
    • 2 Comments
    E.g. add another button below Angle Home and Thrust Home to swap the view around. For movers this can be done by using a custom shutter order. For conventionals it can currently be done if the unit is flipped, i.e. using a negative X tilt and adding or...

  • Have the possibility that [Subdown] and [Subup] They can send two independent commands with one macro.

    Giovanni Fragassi
    • Submitted on
    • 4 Comments
    Hello! I think that this function will be very usefull, in my opinion. And you? Thank you for your attention! Regards

  • Apply Range of Effects to Range of Lights

    gloebell
    • Submitted on
    • 1 Comment
    Hi, I would like to be able to type channel x thru y effect a thru b to apply a different effect to each channel that I can then edit in the effects editor. This would be a nice addition since you guys don’t make the effects channels tab easily accessible...

  • iPad Magic Keyboard with iRFR

    SCERA
    • Submitted on
    • 0 Comments
    Currently, the iRFR app does not with with the iPad Air/pro Magic Keyboard from apple. It would be nice if the keyboard could run the app similarly to how it would work on a computer running ETCNomad. With this, the ability to label cues in the app would...

  • Per Direct Select Double Click

    Stanley Olden
    • Submitted on
    • 1 Comment
    Instead of Direct Select Double Click being a device option having it as a per direct select option would make it a lot easier to start bringing it into workflow. Unfortunately, right now it's a very dangerous option to have enabled (One fat finger...

  • Scroll Stopper

    adasneves
    • Submitted on
    • 1 Comment
    In setup you should implement an option for if you have more than a page of lights, it would stop it from scrolling back to the top once you hit the bottom. This is especially useful if you are scrolling through all your lights to see what a single channel...

  • Fixture profile for pr lighting XR-1400 FRAMING

    txt58678
    • Submitted on
    • 1 Comment
    Hi there, Is there a fixture profile that exists for the pr lighting XR-1400 FRAMING Manual：http://www.pr-lighting.com/product/index125.html Version ETC Eos Family v3.2.6.1 Any help or answers would be amazing!!!!

  • Dongle-free

    Jambalob
    • Submitted on
    • 0 Comments
    I would love to see parameter unlocks available as a software dongle, not a USB unlock. Many modern mobile tablets/convertibles are ditching the USB type A port for USB C. Running around location rigs with a thing dangling off my laptop is a bit silly...

  • [FR] Zooming in on the AR image in iRFR

    Theatermachine
    • Submitted on
    • 0 Comments
    Could you add the possibility to zoom in on the AR image in the iRFR? On a light bridge it might be too crowded to do a good selection. (Or my fingers are too fat...)

www.etcconnect.com