Workbook 2.5.0 file, Capture simulation does not working

The file that is downloaded from the web page you indicated is an executable file (exe). You shouldn't need a Capture demo program to run the file. Just place the file on your desktop and run the file.

Of course, I did it right away.
I ran straight ahead without using a demonstration program.
but only the simulation screen is visible and the output via the console is not executed.
The output of the old file is normally simulated. However, the new file does not respond to the screen.

That is why I happen to guess if there is a problem with the new file.

Do you guys normally simulate it?
So what am I doing wrong?

What kind of your machine to run "Training_Viz_RevB" file either Mac or Window based? What is the operating system code of your machine?

I am using window8.1K , 64bit

And I tried it on another computer using Window7. But both computers have the same symptoms.
Only new files are not simulated.

Does the file to be executed on "Desktop" page? Is it the Operating System software in Korean version on both machines? Do you have any other machine running in "English" version of Operating System software for executing this file?

Btw, what is the IP address setting for your machine?

It could also be a firewall setting that's prohibits the new file from connecting

The problem was not solved using the console language in English.

And I'm not understood that only have to use English version's system to run this program. Is the ETC console used by people all over the world? ..

 

and IP Adress is

PC : 10.101.91.102

Console : 10.101.91.101

both gatway : 255.255.0.0

All firewalls are disabled...

 

I tried simulation on onother computers (The Third) (Window XP, Service Pack3). 

On this computer, a window called Capture-SandNet Interface was launched and both files were simulated normally. 

Will this file only run on Windows XP? In that higher version of  Window, the interface window did not run.   

By the way I mainly use Win7 or win8 and want to run simulations on this computer.

 

Do you receive the file from this site and the simulation works normally? on a Win7 or Wi8

If all of you are working properly, why can not I .... ㅠ_ㅠ

Can you try to run the "Training_Viz_RevB" file as administrator?

By using mouse and right click on the file icon, then select "Run as administrator"

Btw, can you show what path of your file in your machine? like as C:/XX/...

Yes, I ran it with that function...But it's the same situation.

Yes, I ran it with that function...But it's the same situation.