Scenic Element Movable Channel XYZ Values Sticking

When you say "those channels will get values locked", what exactly do you mean?

is the discrepancy between A3D and Live in that they don't show the same position, or is the discrepancy that A3D and Live agree, but both of them don't behave the way you'd expect?

Value source from cue, cue runs, but display still shows unchanged values? Or are you changing manually? If values from cue, what happens if you change the XYZ values manually?

So, the SEM Channels are acting like they have a new locus or "home" position. I am still able to move them and rotate them, but their base location is no longer correct. When I go into Augment3d EDIT mode and click on the SEM Channel it has values populated in the X,Y,Z Location and Rotation fields. As far as I have been told in the past, those fields always remain 0. I guess I have not checked the live positions because they are all in Presets and I just knew that they were wrong, so I went into EDIT mode to correct them. The file is quite large. Is there a file share link that I can use to drop it to you?

I just re-read your reply again. What you say was correct in Augment3d version 1.0: SEM channels were always referencing 0/0/0. This was changed in 3.2 with [A3D-2070]. You can change their base location in the inspector.

Hi,
working on having whole trusses to move up and down. I found that the coordinates do not change in "position" but the nested objects below change in "World". (in Augment3d)
Can it be this?
Excuse me if I'm wrong. That'st he behaviour on my end.

Hi,
working on having whole trusses to move up and down. I found that the coordinates do not change in "position" but the nested objects below change in "World". (in Augment3d)
Can it be this?
Excuse me if I'm wrong. That'st he behaviour on my end.