Unable to get a solid connection with iPhone/iPad iRFR and iOS 5 update.

Hi,

There seems to be a general problem with iOS5 that many iPhone and iPad users have experienced since they upgraded to iOS5. Network connection is frequently dropped. I haven't seen a formal response from Apple yet but I hope they are working to solve this iOS issue.

[Clarification] Turning on Airplane mode as mentioned before might help as a workaround until it gets fixed since it will make sure that the device is using the network connection and not the cellular one.

Well, even with airplane mode/non 3g I can't get a good connection. As a test I dug out my old iTouch with the older iOS on it and it worked fine. I'll use the iTouch for now until Apple gets the connection thing sorted out.

Just got an iPhone 4s.  PIcked it over a droid primarily because of the iRFR app.  Now having the same connectivity problem that others have described.  I have no problem making the connection to the console.  The WIKI instructions were clear and the addressing has to be correct since a connection is made.  The connection simply keeps breaking with the message "No Connection.  Unable to establish a connection".  I click "ok" and then hit the "connect" button and 90% of the time a connection is re-established immediately.  The other 10% of the time it may take several attempts to reconnect.  It is rare for the connection to last as long as 30 seconds.  I'm working with a Netgear Wireless Access Point that is connected to a switch.  While I am not a network guru I suspect like others that the problem lies within the iPhone's operating system.  I hope a solution is found.   I am impressed by the simple elegance of the iRFR app and desperately need the remote control.

Hi Clow,

Two colleagues and myself set up a wireless network yesterday with brand new iRFR apps.  The one with the Andriod worked right off with no apparrent problems.  The guy with the ipod touch and myself with a 4G iphone both were able to connect through the app but were getting booted like you but about every 60 seconds.  We were pretty stymied and neither one of us wanted to reset the network settings on our devices, losing the stored passwords..

Today, we tried this and so far it has seemed to fix the problem;

Turn airplane mode on and go to wireless settings.  Then go to the info screen for the network you're using.  Take note of all the IP, subnet and Gateway addresses.  Turn on the Static button and use those addresses to fill in the blanks. Tab back to the wireless screen.  At that point, I saw the check mark for the network (it was no longer pinwheeling.)  It was a couple of moments before I saw wireless signal bars but they turned up. 

I went straight to the iRFR and stayed connected indefinitely, then went back to turn the airplane mode off and it still worked.  The guy with the ipod Touch got his fixed as well but he has to leave his in airplane mode.

I hope this works for you too.

Brent

Now, if anyone can tell me why the Last Played status the songs on my iphone no longer syncs to my home itunes since I installed OS5...  That would be great.

Never mind all that.  We have now reverted back to consistently dropping out again.

BOOO!!!

ok I tryed some of the things you guys talked about got a better connection so I can lock in the WIFI unit but now it wount see my console UUUGGGHHH

Tryed just about everything yesterday .even called ETC tech support had a co worker  with a 4g using the WIKI instuctions we both connect to the wifi but cant connect to the console .Im doing the 198 upgrade this week,  Hoping that maybe the software needs a deep clear along with a system reset might be in order.Worst part is it was working before I tryed to fix the connection problem again i say UUGGGHHH

I just upgraded as well.  Worst mistake of my life.  I connect for about a minute and then crashes.  Did not have any issue prior to the upgrade.  Sure wish someone would find a solution.  Apple is the devil...

UUUUUUUUGGGGGGGGGHHHHHHHH

Connect to WIFI yes

Ping console yes

Open iRFR No connection

As soon as I start the remote it loses connection and won't link

Also, try turning off Location Services.

Tryed every thing again .the WIFI seems to be stable and I can PING in set-up but as soon as I go back to the welcome screen it no longer sees the console and wont open the iRFR remote really stumped on this one .I upgraded to 198 and did a deep clear and reloaded an older show from before the problem started still cant get anything very frusrating with 3 big shows coming up not having a remote is going to be a real pain

Not that it should have been turned off, but during the software update / deep clear, did the "Allow WiFi remote" get unchecked in the shell settings under RFR? And also the "Allow RFR" Under Desk Settings in the in the console Setup?

Just a thought.

Changed pretty much everything new E switch ,new router ,changed password changed cables off set IP address on phone seems to be pretty stable heres hopping think my WIFI router was just bad or locked up

1 last ????

I have NET2 ports all over mt theatre that are already set up as a network can i plug the WIFI router in to any port or does it need to be near the console I know this is probably a silly question but after this past week i gotta ask

still waiting for computers to make my life easier

Hi Kevin,

As long as your network ports are all patched into the same network infrastructure as your console you should be good to put your WIFI router anywhere.

Unless of course someone has done something funky with your network switch. If a node or gateway works in those ports I would think you'll be fine.

Graham

Hi Kevin,

As long as your network ports are all patched into the same network infrastructure as your console you should be good to put your WIFI router anywhere.

Unless of course someone has done something funky with your network switch. If a node or gateway works in those ports I would think you'll be fine.

Graham